D-Tech Lute Plus Strontium Glass Ionomer Cement
Strontium based Glass Ionomer Luting Cement
Original price was: ₹1,000.00.₹710.00Current price is: ₹710.00.
25 in stock
Fast Shipping
Carrier information
24/7 Support
Unlimited help desk
2-day Delivery
Track or off orders
Description :
Dtech Lute Plus Glass Ionomer Cement Type 1 Luting Cement is a radiopaque glass polyalkeonate chemically cured strontium based glass ionomer cement ideal for basic routine luting of metal-based restorations. It provides excellent adhesion to both tooth and metal. Biocompatibility and a tooth-like coefficient of thermal expansion reduces the risk of post-operative sensitivity. Good mixing properties results in a smooth creamy mix with good flow. Film thickness of just 15 microns makes complete seating of crowns easy. Extended working time with sharp set. Long term fluoride release.
It Provides excellent chemical bond to enamel and dentin while its extremely low film thickness optimizes fit and marginal integrity.
- 1 x Bottle of 12 gm lute plus – Powder
- 1 x squeeze bottle of 9 ml lute plus – Liquid
- 1 x Mixing pad
- 1 x Spoon
- Clean and dry enamel and dentin thoroughly.
- Shake powder bottle to uniformly blend the special powders.
- Dispense 1 full scoop of powder to a mixing pad or glass slab.
- Dispense 2 drops of liquid into the mixing pad or glass slab. When dispensing liquid, hold the dropper vertically.
- Incorporate powder into liquid in small increments. Total mixing time should not exceed 45 seconds
- Apply the material, without delay, in a uniform layer.
- Placement of mixed cement should be done immediately while mix is still glossy; approximately 1.5 to 2 minutes working time. If cement becomes dull, it should be discarded and a new mixture prepared. If a longer working time is needed, mix the cement on a cold, dry slab.
- Excess cement should be removed with a cotton roll immediately, before it sets, and should be cleaned from all surrounding areas such as gingiva and adjacent teeth before final setting.
- 1 x Bottle of 12 gm lute plus – Powder
- 1 x squeeze bottle of 9 ml lute plus – Liquid
- 1 x Mixing pad
- 1 x Spoon
- Clean and dry enamel and dentin thoroughly.
- Shake powder bottle to uniformly blend the special powders.
- Dispense 1 full scoop of powder to a mixing pad or glass slab.
- Dispense 2 drops of liquid into the mixing pad or glass slab. When dispensing liquid, hold the dropper vertically.
- Incorporate powder into liquid in small increments. Total mixing time should not exceed 45 seconds
- Apply the material, without delay, in a uniform layer.
- Placement of mixed cement should be done immediately while mix is still glossy; approximately 1.5 to 2 minutes working time. If cement becomes dull, it should be discarded and a new mixture prepared. If a longer working time is needed, mix the cement on a cold, dry slab.
- Excess cement should be removed with a cotton roll immediately, before it sets, and should be cleaned from all surrounding areas such as gingiva and adjacent teeth before final setting.
Recently Viewed Products:
Related Products :
In stock
In stock
In stock
